Elleebana Lash Extension Glue / Adhesive
Price range: $50.00 through $70.00
Lash Extension Adhesive in Medium setting speed 2-3 Seconds and Fast setting speed 1-2 Seconds
Before Use
You do not want to shake your adhesive with the lid on it as this will result in the adhesive getting on the underside of the lid and the two becoming bonded together. Instead remove the lid and use the small red pin lid included in the pack, then shake your adhesive for a minimum of 1 minute before use. This prepares the consistency of the adhesive and allows the product to be dispensed without separation. If you lose the pin lid, apply sticky tape or aluminium foil over the opening and then apply your finger and start shaking.
Storage
Always store the adhesive away from sunlight, moisture, heat and ensure the lid is sealed well between uses. Storing the adhesive in an air-tight container with a silica pack (also found inside each bag of adhesive) to draw out moisture is recommended. Do not store the adhesive in the fridge after opening – once the seal has been broken on the cap condensation can form on the bottle and the reintroduction of the adhesive to room temperature from the cool environment of a refrigerator, can result in moisture curing the adhesive inside the bottle. You can however, choose to store your adhesive in the fridge with a higher chill temperature than an average refrigerator (perhaps a small bar fridge is an ideal investment for the treatment room). If the fridge is allowed to stay at 17-21 degrees Celsius then the condensation will be less likely to form on the outside of the adhesive as the change in temperature from one environment to the next is not as dramatic. You can store the adhesive in a freezer before opening to prolong the shelf life but be sure to thaw out the bottle well before opening by letting the bottle sit in room temperature for a minimum of 4 hours.
Consistency:
The consistency of this adhesive is thin – perhaps more so than what you might be used to. This thin consistency aids to prevent overloading the lash line with unwanted adhesive. Please ensure you have a small bead on the end of your lash before
attaching if you are performing classic lash applications.
